Firmware Update - Enttec PIXELATOR User Manual

The Clock module can be used to make sure the output is
always synced to the "latest universe" - especially if the
source adds a delay to each universe.

Firmware Update

You can update the firmware on the Pixelator, via the
web browser. The latest firmware files are available on
the product webpage on the ENTTEC website:
www.enttec.com ). Download them to your desktop and
then follow the instructions in the Pixelator's web
browser page, under the Settings section.
Note: While the firmware is being updated, please do
not power off the unit, please wait until the web-page
is processing. (up-to 5 minutes). If the web-page does
not refresh automatically, please open the home page
on the browser manually, and verify that the update
has succeeded.
NMU
NMU (Node Management Utility) is a free Windows and
Mac application that is used to manage compatible
ENTTEC DMX over Ethernet nodes. NMU will not directly
allow you to configure the Pixelator itself, but it can
help you find your unit's IP address and then open a
browser window to access Pixelator.
steps:
Download NMU from
1.
2. Ensure that your Pixelator is hooked up
physically by Ethernet cable to the same physical
network as the computer on which you will run
the NMU.
US Patent Patenting
Follow these
www.enttec.com
Document ID: 2114
3. Press the Discovery button.
4. Once found, select Pixelator and use the IP address
to access the web interface via your web browser.
User Manual
50657 (PIXELATOR)
www.enttec.com
6