Operating The Drive; Identifying The Controls; Opening The Tray Manually - HP Xw4550 - Workstation - 2 GB RAM Installation Manual

5. Select Configure, then click the Playmode radio button for Digital audio extraction.
6. Click OK.
NOTE: If this does not enable the audio, enter the command line:
# alsamixer
This will open a control window that includes audio channel volume controls. Use the arrow key to move
the cursor to the PCM slider, then use the "m" key to toggle PCM to the "on" position.
RHEL 5
The ODD digital audio capability is enabled by default when using RHEL 5.

Operating the drive

Identifying the controls

Item Components
1 Drive Activity Light
2 Manual Eject Button Access Hole
3 Disc Tray
4 Load/Unload Button
NOTE: The drive bezel and drive controls may not be identical to those shown.

Opening the tray manually

If you have exited the CD application and are unable to eject the disc with the Load/Unload Button, or
if right-clicking on the drive letter and selecting the eject function does not work, you can eject the disc
manually by completing the following steps:
1. Insert a straightened paper clip or a metal rod approximately 1.6 mm (1/16 inch) in diameter and
at least 34.9 mm (1 3/8 inches) in length into the Manual Eject Button Access Hole and push firmly
against the Manual Eject Button until the tray releases.
10 SATA optical drive installation
Functions
Illuminates whenever the optical drive is reading information from the disc.
Provides access to the Manual Eject Button to manually release the disc tray
for opening.
Holds the disc.
Causes the drive to open and close the disc tray.
ENWW