Operating the SDLT Drive
This chapter covers the following topics:
■
■
■
■
■
■
■
Power On Self-Test
When power is initially applied, the SDLT drive performs a Power On Self-Test
(POST). After the user powers up the drive, the green indicator flashes while
POST is performing. When the green indicator is illuminated, the drive is ready
for operation.
Note:
4, "Troubleshooting the SDLT Drive."
SDLT Tape Drives Reference Guide
Power On-Self-Test
HP-approved cartridges
Operating the SDLT drive
Front panel indicators and buttons
Write-protecting a cartridge
Cartridge handling and storage
DRTape Solution
If the amber indicator is illuminated, a problem has been detected. See Chapter
3
19