Table of Contents
Advertisement
OIT500-F113-B12-CB3
Product Description
2.3
Displays and Operating Elements
The seven LEDs mounted on the lighting unit can be used to read different information.
1
2
3
4
5
6
7
Figure 2.2
Item
1
2
3
4
5
6
7
8
Lighting unit of the OIT system
Designation
Code OK
Error
Trigger
Stability of image
information
Ready for operation
Power
Lighting control
Function
Reading successful. Flashes for approx. 5 seconds
when the parameters have been applied successfully.
Lights up red when a read error occurs.
Lights up yellow when a connected trigger sensor is
activated.
Lights up red if the captured image could be read but
increasing deterioration of the ambient conditions may
result in a reading error. This can occur, for example, in
the following situations: if the camera image is too
light/dark, if the contrast is too low, if there are too many
structures in the image, if the code sheet is just within
the read distance, or if the code sheet is only just within
the image area.
The LED flashes for approx. 30 seconds while it is
starting up. During this time, no network connection can
be established with the OIT. The LED lights up as soon
as the OIT is ready for operation.
Lights up green when the OIT system is supplied with
power.
Lights up red when infrared illumination is active.
Advertisement
Table of Contents
