Table of Contents
Advertisement
OIT500-F113-B12-CB3
Mounting and Installation
3.4
Setting up Windows Network Communication between the Device and a
PC/Laptop
The OIT system is delivered with a fixed IP address (192.168.2.5). To enable communication
within the network, the network settings of your PC/laptop must be synchronized with the
device and may need to be adjusted. To do so, proceed as follows.
Auto Detect Function
The Auto detect function is available in Vision Configurator. You can use this function to
display all connected Ethernet TCP/IP devices. You can select the device you are looking for in
the output window and read information such as the device's IP address. This function is also
useful if you have inadvertently changed the IP address and no longer know it.
Figure 3.15
Once Auto detect (TCP/IP only) is selected, the software first displays an output window that
is initially empty. When a device is detected, it appears in the output window. The following
information is displayed for each device:
An "Image" of the device
The "Device type"
The "Name" of the device
The "IP" of the device
Auto detect function in Vision Configurator
27
Advertisement
Table of Contents
