Table of Contents
Advertisement
OIT500-F113-B12-CB3
Commissioning
5.6
Configuration window
Various parameters are specified in the configuration window. The individual parameters
depend on the current authorization level and are, therefore, not always all visible. Some
features are available in different variants only. Depending on the parameters set, some fields
will be grayed out.
5.6.1
System Tab
Interfaces Menu Item
Figure 5.14
Network
Enable TCP/IP result
Enable UDP result
TCP/IP port
UDP port
Other
Sensor name
Image Menu Item
Figure 5.15
System tab, Interfaces menu item
Activates the result output via TCP/IP
Activates the result output via UDP
Entry of the port for the TCP/IP connection
Entry of the port for the UDP connection
Enter a device name for the sensor. The device name can be
used instead of the IP address to connect to the sensor
System tab, Image menu item
47
Advertisement
Table of Contents
