Decoder Tab - Pepperl+Fuchs OIT500-F113-B12-CB3 Manual

OIT500-F113-B12-CB3
Commissioning
5.6.4

Decoder Tab

Figure 5.18
Window Location
X start
Y start
Width
Height
Decoder Settings
Plate type
Take 2 images (A+B)
Reduced 2nd exposure
time
Suppress duplicate
reads
Timeout [ms]
Decoder tab, Global menu item
X coordinate of the decoder frame in which the OIT attempts to read a
perforated matrix
Y coordinate of the decoder frame in which the OIT attempts to read a
perforated matrix
Width of the decoder frame in which the OIT attempts to read a perforated
matrix
Height of the decoder frame in which the OIT attempts to read a perforated
matrix
Selects the type of code sheet to be read
CB3 plate: Activates the reading of CB3 code sheets

CB1 plate: Activates the reading of CB1 code sheets

Activates the capture and evaluation of two images (image A +
image B) for one read operation. If no code can be read in the
first image, the second image is also evaluated. Because you
can set different exposure times for the two images, the number
of successful readings can be substantially increased.
Reduces the second exposure time, input in %
The percentage refers to the exposure time for a normal capture
that has been set in the Camera tab under the Common menu
item.
Activates or deactivates duplicate suppression, which prevents
the same code being read several times in succession.
Maximum duration for image capture time and decoding of the
code in ms. If the operation times out, the reading is considered
to have failed.
51