Product Description; Functional Description; Application And Areas Of Use - Pepperl+Fuchs OIT500-F113-B12-CB3 Manual

High-temperature identification system

Table of Contents

OIT500-F113-B12-CB3

Product Description

2.1

OIT500-F113-B12-CB3 (referred to as the OIT system from now on) uses infrared lighting and

evaluates special code sheets that feature code patterns. For this purpose, the OIT system is

fitted with a normal lens and an internal LED board for illuminating the code sheets. The

infrared lighting guarantees optimal contrasts during a read operation, so that even soiled code

sheets can be reliably identified. If the read result deteriorates during operation, the

diagnostics will automatically provide an analysis. You can use CB1 code sheets and CB3

code sheets for the OIT system. Further technical details can be found in the datasheet for the

OIT system.

Figure 2.1

2.2

The OIT system is used for automated manufacturing processes in harsh ambient conditions

where the use of read-only tags with electronic components is difficult or even impossible.

Code sheets with a perforated matrix are used as read-only tags. These code sheets are

designed for use at temperatures of up to 500 °C and can withstand high mechanical stress.

The device is easy to mount and is then ready for use immediately with no teach-in required.

Plug-in connections enable quick replacement of devices. The system is controlled via the

Ethernet interface using simple sets of commands, making it easy to operate. The scratch-

resistant quartz glass panel can be replaced if necessary.

The code pattern punched into the code sheets features an ID that is detected and processed

by the OIT system. The read result is forwarded to a computer via the network interface. The ID

can contain information such as a type designation, paint color, or similar information for the

object on which the code sheet is mounted. To detect the code sheets, the OIT system is

mounted directly in the plant.

The device is only approved for appropriate and intended use. Ignoring these instructions will

void any warranty and absolve the manufacturer from any liability.

Use the device only within the specified ambient and operating conditions.

Protection of the personnel and the plant is not ensured if the device is not used according to

its intended use.

Code sheet and identification system

Table of Contents