Installation; Windows 98/Me/Nt/2000/Xp Installation; Linux Installation - SeaLevel PLC-16.PCI User Manual

Hide thumbs Also See for PLC-16.PCI:

Table of Contents

Do not install the Adapter in the machine until the software has been fully installed.

1. Start Windows.

2. Insert the Sealevel Systems CD in to your CD drive.

3. If 'Auto-Start' is enabled for this drive the software will automatically launch. Otherwise, point your

browser to the 'Index.htm' on the root of the CD

4. Select 'Install Software'.

5. Select the part number for your adapter from the listing.

6. Select 'Windows 98/ME/NT/2000/XP' the setup file will automatically detect the operating environment

and install the proper components. Next (depending on the OS version) select the 'Run from current

location' or 'Open' option. Follow the information presented on the screens that follow. During setup the

user may specify installation directories and other preferred configurations. This program also adds entries

to the system registry that are necessary for specifying the operating parameters for each driver. An

uninstall option is also available to remove SeaIO files and registry/INI file entries from the system.

Windows NT Card Installation: After accomplishing the above steps, bring up the Control Panel and double-click

on the SeaIO Devices icon. To install a new card, click "Add Port". Repeat this procedure for as many SeaIO cards

as you wish to install.

Note: You need to have "root" privileges to install the software and drivers.

1. Login as "root".

2. Mount the CDROM by typing:

mount -t iso9660 /dev/hdc /cdrom

Note Your cdrom may not be /dev/hdc it could be /dev/hda, /dev/hdb, /dev/hdd, or if you have a SCSI drive

/dev/sda, /dev/sdb, /dev/sdc, etc. You may mount the CDROM to any location, the /cdrom is just a common

example.

3. Next change to the directory where you mounted the CDROM:

Ex. cd /cdrom/software/SeaIO/Other/linux

Note: The syntax is case sensitive.

4. Copy seaio .tar.gz to your home directory by typing:

cp seaio .tar.gz ~

5. Change to your home directory by typing:

Sealevel Systems PLC-16.PCI

Installation

Page 2

Table of Contents