Related Manuals for SeaLevel PC-SIO-850
Summary of Contents for SeaLevel PC-SIO-850
- Page 1 PC-SIO-850 User Manual | 3604 © Sealevel Systems, Inc. 3604 Manual | SL9112 10/2022...
-
Page 2: Table Of Contents
APPENDIX A – TROUBLESHOOTING........................9 APPENDIX B – HOW TO GET ASSISTANCE ..................... 10 APPENDIX C – ELECTRICAL INTERFACE ......................11 APPENDIX D – COMPLIANCE NOTICES ......................12 WARRANTY ................................ 13 ....................................© Sealevel Systems, Inc. 3604 Manual | SL9112 10/2022... -
Page 3: Introduction
Release 1.0 and included full hardware support for I/O devices. Release 2.0 coincided with JEIDA’s 4.1 release and is identical. The PC-SIO-850 continues the Sealevel Systems tradition of an easy to use, highly reliable, and technically advanced serial I/O solution. -
Page 4: Before You Get Started
Before You Get Started What’s Included The PC-SIO-850 is shipped with the following items. If any of these items are missing or damaged, contact the supplier. PC-SIO-850 PCMCIA Serial Interface Adapter • DB-25 cable assembly (3604, CA164) or DB-9 cable assembly (3604-DB9) •... -
Page 5: Card Setup
Card Setup Card and Socket Services must be loaded on the system prior to installing the PC-SIO-850 card. Card and Socket Services are supplied by the PCMCIA slot provider (i.e. the computer manufacturer or the PC adapter manufacturer). These may be in the form of a third-party add-on Card and Socket service (e.g. CardSoft’s CardWizard) or with your current operating system (e.g. - Page 6 If your communications package allows the use of Baud rate divisors, choose the appropriate divisor from the following table: For this Data Rate Choose this Divisor 1200 bps 2400 bps 4800 bps 9600 bps 19.2K bps 38.4K bps 57.6K bps 115.2K bps 230.4K bps 460.8K bps © Sealevel Systems, Inc. 3604 Manual | SL9112 10/2022...
-
Page 7: Technical Description
The COMM+850.LPCI utilizes the 16850 UART. This chip features programmable baud rates, data format, interrupt control and industry leading 128-byte FIFOs. The PC-SIO-850 is addressable as any COM: port (e.g. COM1:, COM2:, etc.) The PC-SIO-850 provides for selectable IRQs (3,4,5,7,9,10,11,12,15). I/O address and IRQ combinations are very flexible, and information on selecting these combinations is available in the Card Services Documentation and the supplied software. -
Page 8: Specifications
10 to 90% R.H. Non-Condensing Manufacturing All Sealevel Systems Printed Circuit boards are built to UL 94V0 rating and are 100% electrically tested. These printed circuit boards are solder mask over bare copper or solder mask over tin nickel. Power Requirements... -
Page 9: Appendix A - Troubleshooting
No two adapters can occupy the same I/O address. Make sure the Sealevel Systems adapter is using a unique IRQ. While the Sealevel Systems adapter does allow the sharing of IRQs, many other adapters (i.e., SCSI adapters & on-board serial ports) do not. -
Page 10: Appendix B - How To Get Assistance
If possible, please have the adapter installed in a computer ready to run diagnostics. 3. Sealevel Systems provides an FAQ section on its web site. Please refer to this to answer many common questions. This section can be found at http://www.sealevel.com/faq.asp. -
Page 11: Appendix C - Electrical Interface
0 (space) and -12 volts (-3 to -10 volts) denote a binary 1 (mark). The RS-232 and the EIA/TIA-574 specification define two types of interface circuits, Data Terminal Equipment (DTE) and Data Circuit-Terminating Equipment (DCE). The Sealevel Systems adapter is a DTE interface. © Sealevel Systems, Inc. -
Page 12: Appendix D - Compliance Notices
FCC/EMC directives. This is a Class A Product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. © Sealevel Systems, Inc. 3604 Manual | SL9112 10/2022... -
Page 13: Warranty
Sealevel's commitment to providing the best I/O solutions is reflected in the Lifetime Warranty that is standard on all Sealevel manufactured I/O products. We are able to offer this warranty due to our control of manufacturing quality and the historically high reliability of our products in the field. Sealevel products are designed and manufactured at its Liberty, South Carolina facility, allowing direct control over product development, production, burn-in and testing.