Table of Contents
Advertisement
Introduction
Texas Instruments,
Texas Instruments,
1.2
Required Hardware
1.2.1
MSP430F5529 LaunchPad
The MSP430F5529 LaunchPad will serve as a communication interface between the IPG-UI software and
the TPS65218D0 device. The firmware on the MSP430F5529 needs to be updated before it can
communicate with the TPS65218D0.
MSP430F5529 LaunchPad with a micro-USB cable inserted in the LaunchPad.
Figure 2. BOOSTXL-TPS65218 and MSP430F5529 LaunchPad Connected
NOTE: Do not plug the BOOSTXL-TPS65218 BoosterPack into the MSP430F5529 LaunchPad
before the firmware is updated, as described in
2
Getting Started
Figure 3
shows the high-level block diagram of the BOOSTXL-TPS65218 as it is wired to the
MSP430F5529 LaunchPad through the two 20-pin headers connecting the two PCBs. It also shows the
LaunchPad connected to a computer through a USB cable, which is required for programming the
TPS65218D0 device.
4
BOOSTXL-TPS65218 EVM User's Guide
TPS65218EVM User's Guide
MSP430F5529 LaunchPad Development Kit (MSP-EXP430F5529LP) User's Guide
Figure 2
Copyright © 2018, Texas Instruments Incorporated
shows the BOOSTXL-TP65218 connected on top of the
Section
2.5.
www.ti.com
SLVUBH5 – October 2018
Submit Documentation Feedback
Advertisement
Table of Contents
