Table of Contents
Advertisement
www.ti.com
•
Click the Create Project button.
NOTE: After a project is initially created, it is available in the Create Projects from Recent Devices
menu. When a project is saved, it is available in the Open Recent Projects menu.
•
The TPS65218 Introduction tab is now displayed, as shown in
the Register Map tab to begin communicating with TPS65218D0 device.
•
Click the Read All button and verify that data has changed in the CHIPID register from 0x00 to 0x05.
Verify that only blue notifications appear. Blue notifications are informational only and do not indicate
an error has occurred.
SLVUBH5 – October 2018
Submit Documentation Feedback
Figure 7. Creating New IPG-UI Project for the TPS65218D0
Figure 8. TPS65218D0 Project Introduction Tab in IPG-UI
Figure
9.
Copyright © 2018, Texas Instruments Incorporated
IPG-UI Setup for BOOSTXL-TPS65218
Figure
8. Click the Get Started button or
Software Instructions
11
Advertisement
Table of Contents
