KYMCO G-Dink 125i Manual page 351

9. Front Suspension > Fork Assembly G-Dink 125i
Fork Assembly
SAFETY FIRST: Protective gloves and eyewear are recommended
at this point.
Clean all of the fork components with aerosol brake cleaner and a lint
free cloth. Coat the bushing and seals with fork oil before installation.
Drive the fork slider bushing into the slider with a suitable driver with the
same outside diameter as the bushing.
Insert the damper rod with rebound spring into the inner fork tube. Place
the fork oil lock piece on the end of the damper rod.
Slide the dust seal, oil seal stopper ring and oil seal onto the bottom of
the inner fork tube.
16