KYMCO G-Dink 125i Manual page 147

G-Dink 125i
2. Engine > Valves
Apply grease to the inside of the split keepers. Apply a dab of grease to
the end of a flat blade screwdriver. Set the keeper in the grease on the
screwdriver and insert it onto the valve stem. Repeat this with the other
keeper.
After the valves have been reassemble place a clean shop towel under
the cylinder head in the combustion chamber area and gently tap each
valve stem with a plastic rod and rubber mallet to make sure the valves
are seated properly.
Install the cylinder head. See the CylinderHead topic for more
information.
Install the camshaft. See the Camshaft topic for more information.
63