KYMCO G-Dink 125i Manual page 243

4. Cooling System > Thermostat G-Dink 125i
Insert the two thermostat bolts and tighten them securely with an impact
#3 Phillips screwdriver.
Install air bleed hose and secure it with the clamp.
Connect the coolant hose to the thermostat. Move the clamp into place
and tighten it securely with a #2 Phillips screwdriver.
Fill the coolant and check for leaks. See the Coolant topic for more
information.
Install the body cover. See the Body Covertopic for more information.
Install the rear carrier. See the Rear Carriertopic for more information.
Install the luggage box. See the Luggage Box topic for more information.
Install the seat. See the Seat topic for more information.
33