Table of Contents
Advertisement
The cooking time has elapsed
A signal sounds. The oven stops heating. "Finished"
appears in the status bar. You can cancel the audible
signal early using the
0
Cancelling the cooking time
Press the
button to open the time-setting options
0
menu. Turn the time back. The type of heating and
temperature set are shown in the display.
Changing the cooking time
Press the
button to open the time-setting options
0
menu. Change the cooking time using the rotary
selector.
End time
If you change the end time, please remember that
easily spoiled foods must not be allowed to remain in
the cooking compartment for too long.
Prerequisite: The selected operation has not already
begun. A cooking time has been set. The time-setting
options menu
is open.
0
Example in the picture: You put the dish in the cooking
compartment at 9:30. It takes 45 minutes to cook and
will be ready at 10:15, but you would like it to be ready
at 12:45 instead.
Touch the "End
" field.
y
1.
The end time is displayed.
Using the rotary selector, set a later end time.
2.
Confirm with the Start/Stop button.
3.
The oven is in standby. The
when the operation will be finished appear in the status
bar. The operation starts at the appropriate time. You
can see the cooking time counting down in the status
bar.
button.
symbol and the time
y
The cooking time has elapsed
A signal sounds. The oven stops heating. "Finished"
appears in the status bar. You can cancel the audible
signal early using the
0
Correcting the end time
This is possible if the oven is in standby. Use the
button to open the time-setting options menu, touch
"End
" and use the rotary selector to correct the end
y
time. Press the
0
button to close the menu.
Cancelling the end time
This is possible if the oven is on standby. To do so,
open the time-setting options menu using the
Touch "End
y
" and reset the End time using the rotary
selector. The cooking time immediately starts to count
down.
AChildproof lock
Y our appliance is equipped with a childproof lock so
C h i l d p r o o f l o c k
that children cannot switch it on accidentally or change
any settings.
The control panel is locked and no settings can be
made. The appliance can only be switched off using the
on/off button.
Activating and deactivating
You can activate and deactivate the childproof lock
when the appliance is switched on or off.
In each case, press the
seconds. A confirmation note appears in the display
and the
symbol appears in the status bar.
/
QBasic settings
T here are various settings available to you in order to
B a s i c s e t t i n g s
help use your appliance effectively and simply. You can
change these settings as required.
Changing settings
Press the menu button.
1.
The operating modes menu opens.
Select the "Settings" operating mode.
2.
The first basic setting appears.
Use the rotary selector to change the values.
3.
Touch the
arrow to switch to the next basic
Æ
4.
settings.
Press the menu button to save.
5.
"Save" or "Discard" appears on the display.
Childproof lock
button.
0
button for approx. 4
/
en
0
button.
21
Advertisement
Table of Contents
