Download Print this page
Kohler ALEUTIAN 31241T-8A Installation Instructions
Kohler ALEUTIAN 31241T-8A Installation Instructions

Kohler ALEUTIAN 31241T-8A Installation Instructions

Grooming lavatory faucet (2 hole)

Advertisement

Quick Links

SERVICE PARTS
31241T-8A
Grooming Lavatory Faucet (2 Hole)
1189022**
1186225**
70012
1186223**
1249005
1289691**
1180422
1302055
1180418
1203099**
3027088**
1195902
1024326
1201168
834792
1180420
1180421
1227446
1289688**
1186221
1070967
1070967
1289693
1289694
831587
834704
1024405
1186226
1004899
1066327
1191066
831752
835696
**Color code must be specified when ordering.
1349085-2A-A
ALEUTIAN
1130269
1198281**
1258113
1228834
1203098**
38676
Green:1203096
Gray:1203097
1189998
1189993**
1189997
880037
1189990**
4
INSTALLATION INSTRUCTIONS
31241T-8A
Grooming Lavatory Faucet (2 Hole)
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co. reserves
the right to make changes in product characteristics, packaging, or availability at any time without notice.
Please leave these instructions for the consumer. They contain important information.
NOTE:
1. Flush the water supply pipes thoroughly to remove debris.
2. For new installations, assemble the faucet to lavatory before installation.
3. Recommended working pressure: 2 to 5bar.
4. The highest working pressure for spray is 0.5MPa(5bar). If it exceeds 0.5MPa(5bar), a pressure reducer is
needed. The highest water and environment temperature is 60°C. Please keep spray away from heater, or it may
become damaged and cause to injury to the user.
5. Observe local plumbing codes.
ROUGH-IN DIMENSIONS
102~203
45
Ø60
Ø60
Ø43~Ø45
Ø33~Ø45
Ø64
1349085-2A-A
ALEUTIAN
25°
178
Ø42
G1/2˝
Ø60
Ø31.75
31241T-8A
1

Advertisement

loading

Summary of Contents for Kohler ALEUTIAN 31241T-8A

  • Page 1 Grooming Lavatory Faucet (2 Hole) BEFORE YOU BEGIN All information is based on the latest product information available at the time of publication. Kohler Co. reserves 1130269 the right to make changes in product characteristics, packaging, or availability at any time without notice.
  • Page 2 Remove any excess putty. NOTE: Do not affect the finish and are not recommended for cleaning. reposition the drain after the locknut is tightened, or you may break the putty seal. Do not use abrasive cleaners or solvents on Kohler faucets and fittings. 1349085-2A-A 1349085-2A-A...