Table of Contents
Advertisement
| 8 Removing Power
|
1. Set the CPC CB to the OFF position (refer
|
to page 4-5).
|
2. At the front of frame "A" set the red Unit
|
Emergency Only Switch to the Off position
|
(refer to page 4-5).
|
3. Have the customer set the system(s)
|
breaker to OFF. (refer to page 4-1).
|
4. Disconnect the AC Line Cord from building
|
power. (refer to page 4-1).
| 9 Hardware Management Console(s)
|
1. Disconnect building power from the
|
Hardware Management Console or
|
Standalone Support Element (refer to page
|
3-10).
|
2. Disconnect building power from the display
|
(refer to page 3-10).
|
3. Disconnect building power from modem if
|
modem is attached (refer to page 3-5).
|
4. Disconnect Lan extension cable (Part
|
6339134) from the LAN cable (Part
|
6339098) at the rear of the Hardware
|
Management Console (refer to page 3-8).
|
5. Disconnect the LAN cable (Part 60G1066)
|
from the rear of the Hardware Management
|
Console (refer to page 3-8).
|
6. Disconnect the coaxial cable from the (IBM
|
3270 Connection) if installed (refer to page
|
3-8).
|
7. Disconnect the communication adapter
|
cable from the console and modem if
|
modem is attached (refer to page 3-5).
|
8. Disconnect keyboard from console (refer to
|
page 3-3).
|
9. Disconnect mouse from console (refer to
|
page 3-4).
|
10. Disconnect display from console (refer to
|
page 3-4).
|
11. Disconnect printer if attached from console
|
(refer to page 3-9).
|
12. Disconnect Ethernet adapter cable if
|
installed (refer to page 3-9).
|
13. Package all parts to be shipped.
A-6
Installing the System
Advertisement
Table of Contents
