Motor/Hydraulic Compartment - Skyjack SJ6832 RTE Series Operating Manual

Visual & Maintenance Inspection
Hydraulic
Oil Filter
Oil Level
Gauge
Main
Manifold
Hydraulic
Tank
• Hydraulic Pump
-
Ensure there are no loose or missing
parts and there is no visible damage.
-
Ensure all bolts are properly tightened.
-
Ensure all fittings and hoses are properly
tightened and there is no evidence of
hydraulic leakage.

2.3-6 Motor/Hydraulic Compartment

-
Ensure compartment latch is secure and
in proper working order.
• Hydraulic Tank
-
Ensure hydraulic filler cap is secure.
-
Ensure tank shows no visible damage
and no evidence of hydraulic leakage.
• Hydraulic Oil
-
Ensure platform is fully lowered, and then
visually inspect the sight gauge located
on the side of the hydraulic oil tank.
-
The hydraulic oil level should be at or
slightly above the top mark of the sight
glass.
• Hydraulic Return Filter
-
Ensure filter element is secure.
-
Ensure there are no signs of leakage or
visible damage.
Page 18
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
December 2007
contained in this operating manual and on the aerial platform.
Section 2 - Familiarization
• Main Manifold
-
Ensure all fittings and hoses are properly
tightened and there is no evidence of
hydraulic leakage.
-
Ensure there are no loose wires or missing
fasteners.
-
Restore to original position.
• Gear Type Flow Divider
-
Ensure there are no loose or missing parts
and there is no visible damage.
Rough Terrain Electric Scissors
Gear Type
Flow Divider