Table of Contents
Advertisement
Option CR3 - Wideband IF Output Installation Kit
4. Refer to
Figure 3
Figure 3
Rear Panel Removal
W7
W1
2
2
a. Remove the twenty screws (2) attaching the rear panel (1) to the chassis and to the reference
bracket. The rear panel can now be removed.
b. If W5 is installed on this instrument, remove W5 at the rear panel using a 9/16-inch nut driver,
and disconnect it from the RF assembly.
8
to remove the rear panel.
2
W5
W4
2
1
Installation Note
N9000-90034
Advertisement
Table of Contents
