Table of Contents
Advertisement
c. Locate the two cable assembly N9000-20108 and N9000-20132 in the upgrade kit. Connect
N9000-20108 from AUX IF Assembly J2 connector
(Figure
7). Connect N9000-20132 from AUX IF Assembly J3 connector to AUX IF Out
connector (W5) of the rear panel
Figure 7
Cable Connection
7. Re-install the DIF board (reconnect W4 and W6), rear panel, top brace, reference bracket and
instrument outer case. Avoid pinching cables when installing the top brace.
Installation Note
N9000-90034
(Figure
3). Use 9/16-inch nut driver if necessary.
J336
Option CR3 - Wideband IF Output Installation Kit
(Figure
6) to RF Board J336 connector
11
Advertisement
Table of Contents
