Maintenance, Troubleshooting And Reparation; Maintenance; Update Of The Software - Nassenheider Fill Up 2 visco Manual

nassenheider
Manual Fill Up 2
fill up

11 Maintenance, troubleshooting and reparation

11.1 Maintenance

The filling machine is generally maintenance-free.
In the pump module, honey acts as a lubricant. The ball bearing is lubri-
cated maintenance-free and totally enclosed.
In order to prevent pollutants getting into the honey, ensure
no part of the filling machine is lubricated with machine oil
or the like.
A thorough cleaning after each use is important (after long breaks, before
renewed use) in order to keep abrasive particles away from the plastic pump
module and to thus increase its life span. The life span of the motor and pump
module is aproximately amount of 120,000 kg of pumped honey.
A replacement of individual components is always possible.
Change of the shaft seal rings
After approx. 5-8 tons workload the shaft seal rings of the pump heads
have to be changed. Therefore we offer our sealing set (Art.-No. 307043)
including a manual on how to change them. Attrition of the shaft seal
rings results in liquids leaking at the back of the pump head. If this liquid
soiles the motor behind, the motor might be damaged.
Worn out shaft seal rings also result in air invading the pump head,
which results in inaccurate filling and air pockets inside the filling product.
That is why you should change the shaft seal rings at the latest when
you see air bubbles coming in from the back of the pump head.
Opening of the drive module should only be carried out by
specialists. Within the guarantee period, equipment may
only be opened by specialists assigned by the manufac-
turer; otherwise all warranty claims become invalid.

11.2 Update of the software

The filling machine is equipped with a USB interface. This allows the updat-
ing of the software by means of a PC. Please inquire, on our homepage
www.nassenheider.com or by phoning us directly, about the availability of
a new software-version. This will be provided for downloading and includes
an installation guide. We will also gladly send this software as a CD version.
The current software version is found on the entry menu, after switching the
machine on.
© Stefan Weiland 15.11.2012 Page 25