Processing Of Other Liquids (Apart From Honey); Pre-Settings - Nassenheider Fill Up 2 visco Manual

nassenheider
fill up
8

Processing of other liquids (apart from honey)

Each medium that is put through the machine requires a special selection of our
components according to the unit assembly system. You can choose from diffe-
rent gear wheels, pump heads like the impeller module and peristaltic modules
as well as from different filling nozzles. We can configure the machine to your
special medium and can supply it pre-assembled.
The basis for this is our application form on our homepage:
http://abf.nassenheider.com/anfrags/index_en
The answers to the questions asked help us to determine the perfect solution for
your filling premise.
8.1

Pre-settings

In the configuration menu you can do your own pre-setting, in order to adapt your
filling machine to your own special medium. This requires the following:
- Unit display: grams (g), milliliter (ml), ounce (oz)
- Thickness of liquid: oil (0,9 g/cm³), water 1,0 g/cm³), honey (1,4g/cm³),
or any numeric value between 0,8-1,8 g/cm³
- Pump head
Gear-1: Gear wheel pump head, small, stainless steel (Fill up Liquid)
Gear-2: Gear wheel pumphead, large, plastic (Fill up 2)
Impeller: Impeller pump head for liquid, slightly chunky mediums
Peris-1: Peristaltic pump head, small, for liquids
(filling amount 1 ml - 500 ml)
Peris-2: Peristaltic pump head,big, for liquids
(filling amount 250 ml - 1000 ml)
As far as possible, we configure the special settings of the machine in our factory.
These can however be lost while loading the factory pre-sets (RESET) and may
need to be reset.
© Stefan Weiland 15.11.2012
Manual Fill Up 2
Page 14