Operation; Membrane Keyboard And Display; General Use Of The Keyboard; Modes Of Operation - Nassenheider Fill Up 2 visco Manual

nassenheider
Manual Fill Up 2
fill up

10 Operation

10.1 Membrane keyboard and display

Do not use the keys with you fingernails!
Do not use aggressive detergents!

10.2 General use of the keyboard

10.3 Modes of operation

The operation modes are chosen in the main menu.
10.3.1 Operation mode HAND/PUMP
Pump (with bent pipe Art.No. 304001):
The pumping mode of operation is used for the self-priming, i.e. fill-
ing the hose and the pump-head, for continuous pumping as
well as to stirr creamy honey.
For the stirring of creamy honey, the mode of operation "time switch
clock" can also be used.
Self-priming:
In order for the pump to draw in the honey, the following measures are
necessary
- apply 3 teaspoons of honey, to the gear wheels from above
- connect the bent pipe to the pump head
- place an empty jar below the filling nozzle (approx. 350 ml/ 500g)
- turn speed up to 100/min (max) with the turning knob on the right side
- draw the honey in, using PUMP mode, until the pump head is
filled without any bubbles.
Attention: The honey should be aspired into the pumphead
after about 15 seconds. If not, check the hose-connections
because of airleaks. A longer motion of the gears without or
with only little honey may destroy the pumphead due to too
little greasing by the honey!
© Stefan Weiland 15.11.2012 Page 17