Intended Use; Technical Data; Safeguards - Nassenheider Fill Up 2 visco Manual

nassenheider
fill up
5.1

Intended use

The bottling-machine ʺNASSENHEIDER fill up 2 viscoʺ is desgned
for the dosing and pumping of the following liquids and creams:
Dynamic viscosity:
(depending on the pumphead and equipment) 10³ bis 10
naise, honey, shampoo, yoghurt, fresh cheese, quark, handcreme etc.)
Temperature range for filling:
- from 32°F/ 0°C to 104 °F/ 40°C (gearpump standard version)
- from 104°F/ 40°C to 194°F/ 90°C (gearpump with wheels for hot filling Nr. 302021 or
302022)
- from 32°F/ 0°C to 209°F/ 95°C (impeller- and peristaltic pumphead)
Never bottle any explosive or flammable liquids or liquids containing solvents!
Before using the machine, possible incompatibilities of the filling product and the
parts of the machine have to be clarified (solvents and abrasiv components).
Therefore all products that have to be filled (except honey) are to be approved by
the manufacturer beforehand seperately for each product. If not approved, the ma-
nufacturer is not liable for any following damage or injuries!
5.2

Technical data

Nominal voltage drive module:
No load current:
Power consumption motor:
Revolutions per minute:
Starting torque:
Nominal torque:
Noise emission:
Set up area:
Overall height:
Lower filling nozzle:
Weight:
pumping data for honey :
Max. suction height:
Max. conveyor height pressure side:
Max. pump capacity per hour:
5.3

Safeguards

Motor protection
An electronic overload protection guard is built into the system. Should the pump head be-
come blocked, a warning sign "overload" will appear on the screen. After acknowledging
the blockage by pressing the
Micro fuse
In the power supply and the drive mudule: 8 A, medium time lag, Art.No.. 307009
© Stefan Weiland 15.11.2012
Manual
6 mPa*s (thick oils, sirup, mayon-
U = 24 V DC
N
I = 2,5 A
0
P = approx. 100 VA
14-100 rpm (regulated with a control knob
righthandside of the machine)
M = 90 Nm
A
M = 9,5 Nm
N
<70 dB.
width = 350 mm x depth = 320 mm
520 to 1200 mm (according to model)
50-300 mm (standard stand 500 mm, Art.No. 303012)
50-500 mm (stand 700 mm, Art.No. 303006)
50-800 mm (stand 1000 mm, Art.No. 303023)
approx. 40 lbs/ 18 kg incl. transformer
up to 3.3 ft/ 1,3 m
up to 13 ft/ 4 m
up to 926 lbs/ 420 kg ≙ 300 l/h
-key, work can be continued.
Fill Up 2
Page 6