Intended Use And Design - SaMASZ PG 150 Operator's Manual

3. INTENDED USE AND DESIGN

Being an additional equipment of an extension arm, scissor trimmer is intended for works
near roads and in orchards for trimming branches, bushes, and hedges. Scissors trimmer can cut
branches with diameter up to Ø100mm (Ø10cm).
Scissor trimmers PG is designed to cooperate with the following extension arms:
KWT

Camel

Fisher

Scissor trimmer can be mounted also on other type of extension arm with the same type of a
mounting plate or any other upon its previous adaptation.
CAUTION:
It is forbidden to use the machine for purposes other than those listed in this
instruction. Using the machine for other purposes will be classified as use not
according with the intended use and could exclude the manufacturer from
responsibility from any resulting damages. The machine should be used,
serviced and repaired only by persons familiar with its characteristics and with
safety regulations. Unauthorized modification of the machine may release the
manufacturer from responsibility for any resulting malfunctions or damages.
Operator's manual
Fig. 2. Mounting plate for scissor trimmer
- 3 -
SCISSOR TRIMMER
PG 150 (F), PG 200 (F)
PG 150L (F), PG 200L (F)