After-Season Maintenance And Storing; Restarting The Machine After Repairs Or Longer Storing Periods - SaMASZ PG 150 Operator's Manual

6.2. After-season maintenance and storing

After the machine has been dismounted from the extension arm, for idle period longer than one
month, perform the following maintenance works:
clean the machine thoroughly from any soiling and then wash and dry,

if need be, perform any repairs, adjustments, replacement of sealing or hoses,

lubricate all lubrication points marked with special label as in Fig. 6,

remove any sources of corrosion and complement any paintwork defects,

protect non-painted metal surfaces with a thin film of a solid grease, e.g. ŁT – 43, or gearbox,

mineral or motor oil, e.g. 15W40,
complement or replace illegible warning and information labels,

close connection nozzles of hydraulic hoses,

install the guard on the trimmer's cutting bars.

The machine should be stored in a standstill position in a dry and clean place, inaccessible to
unauthorised personnel and animals, on an even and paved ground under a roof or any other cover
protecting it from the weather.

6.3. Restarting the machine after repairs or longer storing periods

Make sure that all nuts and screws are tightened with correct torque (Tab. 2).

Examine technical condition of hydraulics and drive train as on daily basis.

Tab. 2. Values of bolt tightness
Operator's manual
- 17 -
SCISSOR TRIMMER
PG 150 (F), PG 200 (F)
PG 150L (F), PG 200L (F)