3. USING
3.1. Intended use and design
Being an additional equipment of an extension arm, scissor trimmer is intended for works near
roads and in orchards for trimming branches, bushes, and hedges. Scissors trimmer can cut branches
with diameter up to Ø100mm (Ø10cm). Trimmers PG is designed to cooperate with the following
extension arms:
Scissor trimmer can be mounted also on other type of extension arm with the same type of a
mounting plate or any other upon its previous adaptation.
Forbidden actions during the machine's operation include:
when cutting it is forbidden to make any perpendicular motion with the extension arm in relation to
the cutting plane as this may damage the cutting bars,
it is forbidden to operate the scissor trimmer when cutting bars are contaminated. Sand, rocks,
wires and other solid objects (non-wooden) cause accelerated blunting of blades and their damage,
do not operate the machine if cutting bars have significant plays on guides or there is no lubricant
in between,
it is forbidden to use the trimmer for cutting any non-wooden materials,
it is forbidden to operate the scissor trimmer if any damages are found,
the scissor trimmer is intended for cutting branches only.
Tab. 3. General description of scissors trimmers
Characteristic parameters
Working diameter [m]
Weight [kg]
Operator's manual
• KWT 550 – 5.50 m
• KWT 650 – 6.50 m
• KWT 651 – 6.50 m
Fig. 2. Mounting plate for scissor trimmer
PG 150 (L) – 1,50 m
- 9 -
SCISSOR TRIMMER
PG-150, PG-200
PG-150L, PG-200L
Type of scissor trimmer
PT 200 (L) – 2,00 m
1,50
190
2,00
240