Timer: Auto Start/Stop Feature; Air Directional Louvers; Error Codes - Arctic King WWK Series User Manual

TIMER: AUTO START/STOP FEATURE:

• When the unit is on or off, first press
the Timer button. The TIMER ON
Timer
indicator light illuminates indicating the
Auto Start program has initiated.
• When the time of TIMER ON is
displayed, press the Timer button
again. The TIMER OFF indicator light
illuminates. It indicates the Auto Stop
program has initiated.
• Press or hold the UP (
( ) button to change the Auto time
by 0.5 hour increments, up to 10 hours,
then at 1 hour increments up to 24
hours. The control will count down the
time remaining until start.
• The selected time will register in
5 seconds, and the system will
automatically revert back to display the
previous temperature setting or room
temperature when the unit is on. (when
the unit is off, there is no display.)
• Turning the unit ON or OFF at any time
or adjusting the timer setting to 0.0
will cancel the Auto Start/Stop timed
program.
• If setting ON 0.5 and OFF 1 at the same
time, the unit will be activated in 0.5 hour,
operates for 0.5 hour and then stops.
Displays:
Shows the set temperature in "°C" or "°F"
and the Auto-timer settings. While on Fan
Only mode, it shows the room temperature.

Error codes:

AS - Room temperature sensor error -
Unplug the unit and plug it back in.
If error repeats, call for service.
NOTE: In Fan Only mode, it will
display "LO" or "HI."
Page 12
ES - Evaporator temperature sensor error
NOTE
If the unit shuts off unexpectedly due
to the power outage, it will restart
with the previous function setting
automatically when the power resumes.
) or DOWN
Additional Information
Now that you understand the operating
procedure, here are more features in
your control that you should become
familiar with.
• The Cool circuit has an automatic 3
minute time delayed start if the unit is
turned off and on quickly. This prevents
overheating of the compressor and
possible circuit breaker tripping. The fan
will continue to run during this time.
• The control can display temperature in
Fahrenheit or Celsius. To convert from
one to the other, press and hold the
UP (
buttons at the same time, for 3 seconds.

AIR DIRECTIONAL LOUVERS

Displays
The louvers will allow you to direct the
air flow up or down (on some models)
and lefft or right throughout the room as
needed. Pivot horizontal louvers until the
desired up/down direction is obtained.
Move the levers from side to side until the
desired left/right direction is obtained.
- Unplug the unit and plug it back in. If
error repeats, call for service.
)/DOWN (
Levers
Air Direction
) Temp/Timer