Furuno FA-70 Operator's Manual page 8

Class b ais transponder

Hide thumbs Also See for FA-70:

Table of Contents

FOREWORD

Usage notes

MMSI

Before commencing installation, ensure you have obtained a MMSI number for your vessel.

In the United States of America, it is a violation of the rules of the Federal Communications Com-

mission to input an MMSI that has not been properly assigned to the end user or to otherwise input

any inaccurate data in this device. The MMSI and Static Data must be entered only by a FURUNO

dealer or other appropriately qualified installer of marine communications equipment on board

vessels.

For other locations, check your local regulations for details regarding MMSI and static data input.

Note: You can enter the MMSI only once. If it becomes necessary to change the MMSI, contact

your dealer.

VHF splitter in the FA-70

• AIS transmission and reception can not be done during the VHF radio transmission.

• A "pop" noise may be generated from the VHF radio during the AIS transmission, however this

is not abnormal as it occurs during AIS transmission.

• Supported VHF radio: 155 MHz to 164 MHz, Power < 25 W

Software used in this product

This product includes software to be licensed under the Apache and BSD.

Program No.

0550263-01.** (** denotes minor modifications.)

Table of Contents