Furuno FA-70 Operator's Manual page 5

Class b ais transponder
Hide thumbs Also See for FA-70:
Table of Contents

Advertisement

WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel can work
inside the equipment.
Turn off the power at the
switchboard before beginning
the installation.
Fire or electrical shock can result
if the power is left on.
Do not install the equipment
where it may get wet from rain
or water splash.
Water in the equipment can result
in fire, electrical shock or damage
to the equipment.
Be sure that the power supply is
compatible with the voltage
rating of the equipment.
Connection of an incorrect power
supply can cause fire or damage
the equipment.
Radiation Hazard
WARNING
Do not approach the antenna
closer than 0.2 m when it is
transmitting.
The antenna emits radio waves
which can be harmful to the human
body, particularly the eyes.
Radiation level
100 W/m
10 W/m
2
2 W/m
Safety Instructions for the Installer
Distance
2
N/A
2
N/A
0.2 m
CAUTION
Observe the following compass
safe distances to prevent
interference to a magnetic
compass:
Type
GPA-017S
Antenna
Unit
GPA-017
GPA-C01
AIS
Transponder FA-70
Power
PR-240
Supply Unit
SAFETY INSTRUCTIONS
Standard
Steering
compass
compass
0.3 m
0.3 m
0.3 m
0.3 m
0.3 m
0.3 m
0.3 m
0.3 m
0.9 m
0.6 m
iii

Advertisement

Table of Contents
loading

Table of Contents