Advertisement
Operation
Operating Tips
Using the High Blade Speed Setting
For best mowing and maximum air circulation, operate the blades at the
required to thoroughly cut grass clippings, so do not set the height of cut so low as to totally
surround the mower in uncut grass. Always try to have 1 side of the mower free from uncut
grass, which allows air to be drawn into the mower.
Cutting a Lawn for the First Time
Cut grass slightly longer than normal to ensure that the cutting height of the mower does not
scalp any uneven ground. However, the cutting height used in the past is generally the best
one to use. When cutting grass longer than 15 cm (6 inches) tall, cut the lawn twice to
ensure an acceptable quality of cut.
Cutting a Third of the Grass Blade
Cut only about a third of the grass blade. Cutting more than that is not recommended unless
grass is sparse, or it is late fall when grass grows more slowly.
Alternating the Mowing Direction
Alternate the mowing direction to keep the grass standing straight. This also helps disperse
clippings which enhances decomposition and fertilization.
Mowing at Correct Intervals
Grass grows at different rates at different times of the year. To maintain the same cutting
height, mow more often in early spring. As the grass growth rate slows in mid summer, mow
less frequently. If you cannot mow for an extended period, first mow at a high cutting height,
then mow again 2 days later at a lower height setting.
Using a Slower Cutting Speed
To improve cut quality, use a slower ground speed in certain conditions.
Avoiding Cutting Too Low
When mowing uneven turf, raise the cutting height to avoid scalping the turf.
Stopping the Machine
If you must stop the forward motion of the machine while mowing, a clump of grass clippings
may drop onto your lawn. To avoid this, move onto a previously cut area with the blades
engaged or you can disengage the mower deck while moving forward.
Page 4
position. Air is
HIGH
3465-258 A
Advertisement
