ABB ACQ580-04 Series Quick Installation Manual page 22

22 Start-up with the First start assistant on a Hand-Off-Auto control panel
Check that the motor data is correct. Values
are predefined on the basis of the drive size
but you should verify that they correspond to
the motor.
Start with the motor type.Go to the edit view
of a selected row by pressing
• Scroll the view with
Motor nominal cosΦ and nominal torque are
optional.
Press (Next) to continue.
Adjust the limits according to your needs.
• Go to the edit view of a selected row by
pressing
• Scroll the view with
Go to the next view by pressing
(Next).
If you want to make a backup of the settings
made so far, select Backup and press
(Next).
If you do not want to make a backup, select
Not now and press
The first start is now complete and the drive
is ready for use.
Press (Done) to enter the Home view.
The Home view monitoring the values of the
selected signals is shown on the panel.
For changing the signals and their display
style shown in the Home view, see ACQ-AP-
x assistant control panels user's manual
(3AUA0000085685 [English]).
.
and .
.
and .
(Next).