ABB ACQ580-04 Series Quick Installation Manual page 19

Start-up with the First start assistant on a Hand-Off-Auto control panel
Quick start-up guide
This guide describes how to start-up the drive using the First start
assistant on the Hand-Off-Auto control panel.
start-up, see ACQ580 firmware manual (3AXD50000035867 [English]).
Before you start
Ensure that the drive has been installed as described in
Start-up with the First start assistant on a Hand-Off-
Auto control panel
Make sure that the installation work is complete. Make sure that cover of the
drive and the cable box, if included, are on place.
Check that the starting of the motor does not cause any danger. De-
couple the driven machine if there is a risk of damage in case of an
incorrect direction of rotation.
Hints on using the assistant control panel
The two commands at the bottom of the
display (Options and Menu in the figure on
the right), show the functions of the two
softkeys
display. The commands assigned to the
softkeys vary depending on the context.
Use keys ,
cursor and/or change values depending on
the active view.
Key shows a context-sensitive help page.
?
Language, date and time, and motor nominal values
Have the motor or pump name plate data at
hand.
Power up the drive.
and located below the
, and to move the
1 – First start assistant guided settings:
For complete information on
Safety
19