Fitting The Cover - Fein WSG 8-115 Repair Instructions

Schleifen
Assembly

9.3.5 Fitting the cover

Steps that must be completed:
- Fitting the gearbox housing
- Assembling the bearing plate
- Positioning the bearing plate
- Assembling the armature
- Fitting the armature
- Fitting the stator
- Fitting the gearbox housing
- Fitting the switch
Tools:
- Torx T15
- Assembly aid
C-SC_CSSM
1.
1
2.
2
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Position the cover (1).
Screw in the two screws (2) [1.5 Nm].
29.01.2020 Page 47 of 49