Disassembling The Gearbox Housing - Fein WSG 8-115 Repair Instructions

Schleifen
Disassembly

8.4.3 Disassembling the gearbox housing

Steps that must be completed:
- Removing the cover
- Removing the switch
- Removing the carbon brushes
- Removing the gearbox housing
- Removing the bearing plate
Tools:
- Slotted screwdriver
1
2
C-SC_CSSM
1.
2.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Remove the air guide ring (1).
Remove the pushbutton (2).
29.01.2020 Page 30 of 49