Schleifen
Disassembly
8.4.2 Disassembling the bearing plate
Steps that must be completed:
-
Removing the bearing plate
Tools:
-
Punch, 12 mm diameter
-
Torx T15
-
Arbor press
-
Sleeve
35 mm inner diameter
14 mm inner diameter
19 mm outer diameter
30 mm inner diameter
42 mm outer diameter
1
3
4
C-SC_CSSM
1.
2.
2
3.
4.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Press out the shaft (1).
Remove the disc (2).
Unscrew the three screws (3).
Remove the plate (4).
29.01.2020
Page 28 of 49