Fitting The Housing; Fitting The Gearbox Housing - Fein WSG 8-115 Repair Instructions

Schleifen
Assembly

9.3 Fitting the housing

9.3.1 Fitting the gearbox housing

Steps that must be completed:
- Fitting the gearbox housing
- Assembling the bearing plate
Tools:
- Torx T20
2
C-SC_CSSM
1
4
3
5
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1. Position the gearbox housing (1).
2. Screw in the four screws (2) [2.7 Nm].
3. Position the spring (3).
4. Position the screw (4).
5. Position the disc (5).
29.01.2020 Page 40 of 49