Removing The Motor; Removing The Stator - Fein WSG 8-115 Repair Instructions

Schleifen
Disassembly

8.3 Removing the motor

8.3.1 Removing the stator

Steps that must be completed:
- Removing the cover
- Removing the switch
- Removing the carbon brushes
- Removing the gearbox housing
Tools:
- Torx T20
- Torx T15
- Plastic hammer
1
2
C-SC_CSSM
3 4
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1. Remove the air guide ring (1).
2. Remove the slide switch (2).
3. Remove the carbon brush holder (3).
4. Repeat step 3 on the opposite side of the machine.
5. Remove the control rod (4).
29.01.2020 Page 22 of 49