Positioning The Carbon Brushes - Fein WSG 8-115 Repair Instructions

Schleifen
Assembly

9.3.2 Positioning the carbon brushes

Steps that must be completed:
- Fitting the gearbox housing
- Assembling the bearing plate
- Positioning the bearing plate
- Assembling the armature
- Fitting the armature
- Fitting the stator
- Fitting the gearbox housing
Tools:
- Assembly aid
1
C-SC_CSSM
1.
2
2.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Position the carbon brush (1).
Position the spring (2).
29.01.2020 Page 42 of 49