Schleifen
Disassembly
8.2.2 Disassembling the switch (WSG 8; WSG 11)
Steps that must be completed:
-
Removing the cover
Tools:
-
Torx T15
-
Slotted screwdriver (small)
3
230 V variant
120 V variant
110 V variant
C-SC_CSSM
2
1
4
5
5
5
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1.
Unscrew the screw (1).
2.
Remove the cable clamp (2).
3.
Unscrew the two screws (3).
4.
Remove the cover (4).
5.
Remove the switch (5).
29.01.2020
Page 15 of 49