Schleifen
Assembly
9.2.2 Fitting the armature
Steps that must be completed:
-
Fitting the gearbox housing
-
Assembling the bearing plate
-
Positioning the bearing plate
-
Assembling the armature
1
C-SC_CSSM
1.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
I
NFORMATION
The plate must lie in the recess of the air guide ring.
Press in the armature (1).
N
!
OTE
Damage to the gearbox and/or the motor.
The axial displacement of the armature leads to damage to
the gearbox and/or the motor.
If the armature can be pulled out of the gearbox head by
hand, the gearbox housing must be replaced.
29.01.2020
Page 37 of 49