Steelcase Duo Tall Storage Mounted on Montage Assembly Instructions Manual page 5

NOTE: If installing a cantilevered
worksurface under the tall storage
unit, install the cantilever and the
mounting plate before step 6.
6.
Lower the tall storage unit into place (6a) by
sliding the mounting bracket into the slots on the
wall (6b) and placing the other end of unit upon
the column (6c).
7.
Make sure the tall storage is centered
with the column according to the
measurements drawn in
step 4 on page 4.
6b
6a
6c
A
PENCIL
7
MARKS
CENTERED
Page 5 of 8
939500188 Rev C