Advertisement
Quick Links
Care and Cleaning:
Never use abrasives or abrasive cleaning agents to clean this product. Clean regularly with
contamination free warm soapy water and a damp soft cloth.
Methven warrants this product against manufacturing defects and that it is suitable for use
under the general operating conditions specified in this instruction sheet. However, regional
regulations apply and may affect your warranty. Please refer to www.methven.com or call
customer service for full details.
New Zealand
0800 804 222
439862
Australia
1300 638 483
BATH FILLER
Installation Guide
Technical Specifications:
Operating Pressure:
Min: 30kPa/0.3bar
Max: 1000kPa/10bar*
Optimum: 150kPa/1.5bar - 500kPa/5bar
Operating Temperature:
Hot: Max 70°C*
Cold: Min 5°C
Inlet Connections:
All ¾" BSP
* Regional specific regulations apply.
Please refer to your warranty statement at
www.methven.com
UK
0800 195 1602
ISSUE A
www.methven.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for METHVEN Indra INBFCPUK
Summary of Contents for METHVEN Indra INBFCPUK
- Page 1 Never use abrasives or abrasive cleaning agents to clean this product. Clean regularly with contamination free warm soapy water and a damp soft cloth. Methven warrants this product against manufacturing defects and that it is suitable for use under the general operating conditions specified in this instruction sheet. However, regional regulations apply and may affect your warranty.
- Page 2 IMPORTANT: Before you begin, turn off the water supply. General: Step 1 • Methven recommends this product is installed by a licensed plumber in compliance with all relevant regional regulations. • Insert base ring seals into the grooves in the bottom of the base rings.
Need help?
Do you have a question about the Indra INBFCPUK and is the answer not in the manual?
Questions and answers