Advertisement
Quick Links
Care and Cleaning:
Never use abrasives or abrasive cleaning agents to clean this product. Clean regularly with
contamination free warm soapy water and a damp soft cloth.
Periodically. the aerator should be removed as shown below, and cleaned under running water.
Methven warrants this product against manufacturing defects and that it is suitable for use
under the general operating conditions specified in this instruction sheet. However, regional
regulations apply and may affect your warranty. Please refer to www.methven.com or call
customer service for full details.
New Zealand
Australia
Wall Mounted Spout
Installation Guide
Technical Specifications:
Operating Pressure:
Min:
kPa/
bar
Max:
kPa/ bar*
Operating Temperature:
Hot: Max
°C*
Cold: Min °C
Inlet Connections:
All ½" BSP
USE PARALLEL FITTINGS ONLY
* Regional specific regulations apply.
Please refer to your warranty statement
at www.methven.com
UK
ISSUE A
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for METHVEN FLEXISPRAY
Summary of Contents for METHVEN FLEXISPRAY
- Page 1 Please refer to your warranty statement at www.methven.com Methven warrants this product against manufacturing defects and that it is suitable for use under the general operating conditions specified in this instruction sheet. However, regional regulations apply and may affect your warranty. Please refer to www.methven.com or call customer service for full details.
- Page 2 • Install a female 1/2” BSP elbow (not supplied) • Methven recommends this product is installed by a licensed plumber in compliance with in the wall cavity such that the front face of the all relevant regional regulations. elbow is mm behind the front face of the stud.
Need help?
Do you have a question about the FLEXISPRAY and is the answer not in the manual?
Questions and answers