Advertisement
Quick Links
Ceramic Cartridge Adjustment
Do not remove the ceramic cartridge from the body assembly while carrying out the
following adjustments. Note, the cartridge is factory set for maximum temperature.
Remove half-dome (if attached)
MAY 2016
Methven Australia Pty Ltd
ABN 15 104 813 390
Melbourne, Australia
www.methven.com
Mix temperature limiting adjustment
-
+
MA433097A Issue B
Minimalist Hi-Rise Sink Mixer
Gooseneck 01-2350
Square Neck 01-2381
Illustration may not reflect actual product shape.
Installation Guide
IMPORTANT
Please read all of the instructions before installation
Use of this product in non-domestic applications voids warranty.
All pipe work must be thoroughly flushed prior to the installation of the mixer.
NEFA inline filters must be installed on both hot and cold supplies.
Do not remove the ceramic cartridge from the mixer when installing.
Damage caused by hydrostatic testing is not covered by our warranty.
www.methven.com
WMKA 21005
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for METHVEN Gooseneck 01-2350
Summary of Contents for METHVEN Gooseneck 01-2350
- Page 1 Do not remove the ceramic cartridge from the mixer when installing. Damage caused by hydrostatic testing is not covered by our warranty. MAY 2016 MA433097A Issue B Methven Australia Pty Ltd ABN 15 104 813 390 www.methven.com Melbourne, Australia www.methven.com...
- Page 2 Damage to the ceramic cartridge may occur, voiding our warranty. THE METHVEN GUARANTEE The warranty statement shall apply to all tapware & showers supplied by Methven We recommend that this product is installed by a licensed plumber. For more information visit www.methven.com...
Need help?
Do you have a question about the Gooseneck 01-2350 and is the answer not in the manual?
Questions and answers