Advertisement
Table of Contents
SATINJET
Installation Guide
Technical Specifications:
Operating Temperature:
Hot: Max 60°C*
Cold: Min 5°C
SHOWER ARMS
Operating Pressure:
Min: 35kPa/0.35bar
Max: 500kPa/5bar*
Optimum: 35kPa/0.35bar
- 500kPa/5bar
OVERHEAD SHOWER/ARM
®
Inlet Connections:
All ½" BSP
* Regional specific regulations apply.
Please refer to your warranty statement at
www.methven.com
OVERHEAD SHOWERS
Operating Pressure:
Min: 35kPa/0.35bar
Max: 500kPa/5bar*
Optimum: 35kPa/0.35bar -
500kPa/5bar
www.methven.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for METHVEN SATINJET
Summary of Contents for METHVEN SATINJET
- Page 1 SATINJET OVERHEAD SHOWER/ARM ® Installation Guide Technical Specifications: Operating Temperature: Inlet Connections: * Regional specific regulations apply. Please refer to your warranty statement at Hot: Max 60°C* All ½" BSP www.methven.com Cold: Min 5°C SHOWER ARMS OVERHEAD SHOWERS Operating Pressure: Operating Pressure: Min: 35kPa/0.35bar...
- Page 2 Filter Washer than 150kPa/1.5bar at the outlet. Additionally showers with flow rates of less than 9L/min Methven Satinjet may not allow the following to function Overhead Shower correctly: (If Supplied) ·...
Need help?
Do you have a question about the SATINJET and is the answer not in the manual?
Questions and answers