METHVEN Kaha 113 Installation Manual

Swivel basin mixer

Enlarged version

Methven warrants this product against manufacturing defects and that it is suitable for use

under the operating conditions specified in this instruction sheet.

For your warranty please refer to www.methven.com or call Customer Service

New Zealand

0800 804 222

435017

Australia

1300 638 483

0800 195 1602

KAHA SWIVEL BASIN MIXER

INSTALLATION GUIDE

TECHNICAL SPECIFICATIONS

Min 0.35 bar, Max 10 bar.

Recommended 0.35 bar - 5 bar.

Recommended installation of a pressure

limiting valve if supply exceeds 5 bar.

Hot: Max 80°C.

Cold: Min 5°C.

Notes:

●

After installation all connections

must be checked for leaks.

●

All installations must be carried

out in compliance with relevant

water regulations.

Issue A

Table of Contents

Do you have a question about the Kaha 113 and is the answer not in the manual?

Page 1 Methven warrants this product against manufacturing defects and that it is suitable for use under the operating conditions specified in this instruction sheet. For your warranty please refer to www.methven.com or call Customer Service...
Page 2 IMPORTANT All pipework must be thoroughly flushed prior to the installation of the mixer. In-line filters (not supplied) must be fitted on both hot and cold supplies to prevent foreign particles Please read all of the instructions before installation damaging the ceramic cartridge. This mixer is designed for all pressure systems above 0.35 bar.