Reception Of Weather Channel Broadcasts - Vertex Standard SPIRIT VXA-710 Operating Manual

Reception of Weather Channel Broadcasts

( USA version only )
The VXA-710 can receive VHF Weather Channel broad-
casts, which may assist your flight planning. The VXA-
710 includes a ten-channel auto-search feature, which sim-
plifies access to Weather Channels when you are in an
unfamiliar location.
To receive Weather
Channels, press the
key (repeatedly, if nec-
essary) to select the
Weather Channel mode.
In the Weather Channel
mode, "WX" will appear
upper left corner of the
display.
The VXA-710 will now
scan quickly though the
ten standard Weather Channels, and will stop on the
first active station found.
If there are two or more weather channels audible in
your area, you may select the alternate channel(s) by
pressing the PTT switch. Pressing the PTT switch re-
initiates the scanning process.
B O
ASIC PERATION
If there are no Weather
Channels in your area, the
scanner will not stop.
Press the MONITOR but-
ton to stop the scanner.
Yo u c a n a l s o s e l e c t
Weather Channels manu-
ally by rotating the DIAL
selector knob.
To exit the Weather Channel mode, press the
momentarily to return to the VFO mode.
Note 1: In the event of extreme weather disturbances, such
as storms and hurricanes, the NOAA (National Oceanic
and Atmospheric Administration) sends a weather alert ac-
companied by a 1050 Hz tone and subsequent weather
report on one of the NOAA weather channels. You may
setup the Alert function when receiving the Weather Alert
signal via Menu Item (6. Misc Setup, 3. WX Alert), if
desired.
Note 2: The Weather Channel mode memorizes the last
Weather Channel you have used, and will retain this infor-
mation until the radio is turned off.
VXA-710 S
Channel Frequency
WX 1 162.5500 MHz
WX 2 162.4000 MHz
WX 3 162.4750 MHz
WX 4 162.4250 MHz
WX 5 162.4500 MHz
WX 6 162.5000 MHz
WX 7 162.5250 MHz
WX 8 161.6500 MHz
WX 9 161.7750 MHz
WX 10 163.2750 MHz
key
O M