Deleting Memories; Home Channel Memory - Vertex Standard SPIRIT VXA-710 Operating Manual

Deleting Memories

With the VXA-710 in the Memory mode, rotate the
DIAL selector knob to select the memory channel you
wish to delete.
Press the key, then press and hold the
2 seconds. The previously-selected memory will be
deleted.
Note: Once deleted, channel data cannot be recovered!

Home Channel Memory

A special "HOME" channel is available, to allow quick
recall of a favorite operating frequency. Memory storage
is simple to accomplish:
Select the desired frequency in the VFO mode, or re-
call the "Book" Memory channel or Weather channel
to be stored in the "HOME" channel.
Press and hold in the
play will indicate "MW" and a channel number will
blink on the LCD.
Within five seconds of pressing the
and hold in the key for 2 seconds. The frequency
and other data (if any) will now be stored in the spe-
cial "HOME" channel register.
To recall the "HOME" channel, press the
followed by the key.
M
EMORY
key for
key for 2 seconds. The dis-
key, press
key
O
PERATION
You may also attach an alpha/numeric name (label) to the
"HOME" channel.
Recall the "HOME" channel, by pressing the
followed by the
Now press and hold in the
will now see the blinking "A" character on the LCD.
Use the DIAL selector knob to select any of the 125
available characters (including letters, numbers, and
special symbols). Press the
call the desired letter, number, and symbol in the first
charactor slot (a
desired first character appears, press the
mentarily to select it and move on to the next charac-
ter.
Select succeeding characters in the same manner,
pressing the
tion.
After entering the entire name (eight characters maxi-
mum), press the
for the channel and exit.
Press the key followed by the
the readout structure of the Memory display between
"Frequency Indication" and "Frequency Indication
plus Alpha-numeric Label."
VXA-710 S
key.
key for 2 seconds; you
key repeatedly to re-
.
0 A a ...). When the
key mo-
key momentarily after each selec-
key for 2 seconds to save all data
key to change
O M
key